Miteck’s Blow Thru Rotary Airlock Is Designed Specifically For Pneumatic Conveying Applications. Blow Thru Ports Are Located In The End Covers So That The Conveying Air Sweeps Straight Through The Pockets. This Design Makes The Valve Well Suited For Low Profile Installations Where Space Is Limited. With The Convey Line Air Blowing Direct Through The Pockets, It Is Also Ideal For Products That Have A Tendency To Build Up In The Rotor Pockets. This Rotary Valve Is Used To Meter Sticky Or Cohesive Powder Bulk Materials In A Pneumatic Conveyor ,
Due To The Modular Design Of This Extensive And Flexible Range Of Valves Many Different Configurations Are Available, Using Standard Components.
We Also Can Design With Enlarged Inlet Is Specifically For Applications Where Inlet Size Is More Important That Capacity Or For Handling Products With Poor Flowability. This Valve Is Also Available With An Extra Enlarged Inlet.
Miteck’s Blow Thru Rotary airlock valve benefits
- Customized SolutionsAs Per Your Flange , M.O.C. Requirement ,
- High Filling Efficiency
- Sheared Angle Inlet
- Minimum Air Leakage
- Explosion Proof Models Available Up To 10 Bar G
- Drilled Flanges In Accordance With PN10, ANSI 150lbsAnd JIS
- FlameproofVersions Available Suitable For St2 Products
- Versions Conforming To ATEX2014/34/EU Available
- Easy Detachable Versions Available
Blow Thru Rotary Airlock technical parameters
Body & End Covers: Precision Machined Cast Iron, Cast Aluminum Or Cast Stainless Steel, Options: Hard Chrome, Nickel Coated, Teflon Coated, Tungsten Carbide Coated, Body Vents, Inspection Doors, End Purge
Flanges: ASA Pattern Round
Rotor: Precision Machined Fabricated Mild Steel Or Stainless Steel, Open End Or Closed End (Shrouded), Options: Fixed Blades, Adjustable Tips, Beveled Edges, Scalloped Pockets, Quick Release, Reduced Volume, Staggered Pockets
Rotor Tip Options: Mild Steel, Stainless Steel, Abrasion Resistant Steel, Bronze, Brass, Polyethylene, Teflon, UHMW, Viton, EPDM, Rubber, Neoprene
Shaft Seals: Gland Type With Packing, Options – Air Purge, Grease Purge, Lip Seals, V-Rings
Bearings: Grease Purge Fitting, Options – High Temp Solid Lube
Gear Reducer: High Efficiency Helical Gear, Double Reduction, Options – Triple Reduction And Right Angle
Motor: C-Face, TEFC, Options – Inverter Duty, Explosion Proof, Severe Duty, Wash Down Duty, Premium Efficient
Drive: ANSI Chain With Taperlock Sprockets And Bushings, Options – Shear Pin Sprocket, Oil Bath, V-Belt, Direct Coupled
Other Options: Speed Switches, Inlet And Outlet Adapters And Transitions, Controls
Applications of Blow Thru Rotary Airlock – Vacuum Dilute Phase Conveying System
